Standard resistance

From Planet of the Vapes Wiki
Revision as of 23:18, 4 November 2013 by Tubbyengineer (talk | contribs) (Created page with "== Standard Resistance == This refers to coils built using the same practices as mass production, namely that you use a set thickness of resistance wire, wound a set numb...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Standard Resistance

This refers to coils built using the same practices as mass production, namely that you use a set thickness of resistance wire, wound a set number of times around a set thickness of wick. This results in coils that are usually very close to each other in resistance. It is usual to make coils of about 2 ohms during the early stages of coil building.

CAUTION - YOU MUST ALWAYS CHECK A NEWLY BUILT COIL FOR SHORT CIRCUITS. SHORT CIRCUITS CAN RESULT IN BATTERIES VENTING OR EXPLODING.