Fix a hot spot on the AGA-T

From Planet of the Vapes Wiki
Jump to: navigation, search

This one shows a rough approximation of the top of the AGA-T+ (wire in brown) and how it normally sits once the wires are attached to the terminals.

Agasketch.jpg

Often if there is a hot spot, it is where the wire comes off the wick at the top or bottom.We have found this counteracts it a bit,

  • Take a flat bladed screwdriver and kink the wire between the top wick and terminal and the bottom wick and terminal (see picture below). This pushes the wire further round the wick before it comes off and goes to the terminals, making short area of wire not in contact with the wick.

Aga2.jpg


Back to Main Page

Back to Rebuildables

Back to AGA-T

Back to AGA-T+