VMAX

From Planet of the Vapes Wiki
Jump to: navigation, search

Features:

VMax can be adjusted from 3.0-6.0V volts in 0.1 volt increments.

Built-in three digit display allows you to visually adjust your voltage.

VMax holds two specially designed 18350 High Power Batteries.

VMax is made of brass painted with black/silver.

VMax PCB allows 5 Amperage output limit.

VMax buttom never get stucked which flexble 360° turnning around.

Vmax user settings:

  • UU- Power up
  • UD- Power down
  • SO- Power on/off
  • UC- Battery Check
  • DS - display information setting
  • *do- atomizer output voltage
  • *du- battery output voltage
  • *dR - atomizer ohm
  • LO- LED on/off





Power Adjust Up:

  • 1. Press the button 3 times in a row until "UU" is shown on the display.
  • 2. When UU is shown on the display, leave the button idle for 2 seconds. The display will change to show the last voltage selected.
  • 3. Once the voltage is displayed, each time you press the button the voltage will advance to the next higher setting: 3.1,3.2,3.3 etc. When you reach 6.0, it will rotate back to 3.0 and go up again.
  • 4. When you have reached the desired setting, leave the button idle for 2 seconds. The setting will be saved and VV will resume normal operation.


Power Adjust Down:

  • 1. Press the button 4 times in a row until "UD" is shown on the display .
  • 2. When UD is shown on the display , leave the button idle for 2 seconds. The display will change to show the last voltage selected.
  • 4. Once the voltage is displayed, each time you press the button the voltage will advance to the next lower setting: 5.9,5.8,5.7 etc. When you reach 3.0, it will rotate back to 6.0 and go up again.
  • 4. when you have reached the desired setting, leave the button idle for 2 second. The setting will be saved and VV will resume normal operation.

Power On/Off:

  • 1. Press the button 5 times in a row until "SO" is shown on the display.
  • 2. When UD is shown on the display, leave the button idle for 2 seconds. The display will show the last setting, on or off .
  • 4. Each time you press the button the display will toggle between on/off.
  • 4. When you have reached the desired setting, leave the button idle for 2 seconds. If you selected "OF" the VV will go into standby mode.

Battery Check:

  • 1. Press the button 6 times in a row until UC is shown on the display.
  • 2. When UC is shown on the display, leave the button idle for 2 seconds, the digital display will show your battery voltage measurement.
  • 3. The battery voltage will be displayed for 2 seconds, then the display will turn off.

Display Information Setting During Vaping:

  • 1. Press the button 7 times in a row until DS is shown on the display,
  • 2. When DS is shown on the display, leave the button for 2 seconds, the display will show the current setting: DO, DU or DR.
  • 3. Each time you press the button, the setting will toggle among "DO" "DU" or "DR" ,
  • 4. When "DO" is chosen, leave the button idle for 2 seconds, the setting will be saved and the display will show your atomizer working output voltage during your vaping;
  • 5. When "DU" is chosen, leave the button idle for 2 second, the setting will be saved and the display will show your battery voltage during your vaping.
  • 6. When "DR" is chosen, leave the button idle for 2 seconds, the setting will be saved and the display will show your atomizer resistance during your vaping.

LED On/Off

  • 1. Press the button 8 times in a row until "LO" is shown on the display.
  • 2. When LO is shown on the display, leave the button idle for 2 seconds, the display will show the current setting: ON/OFF .
  • 3. Each time you press the button, the setting will toggle between on/off.
  • 4. When you have reached the desired setting, leave the button idle for 2 seconds. The setting will be saved and VV will resume normal operation.

Short Circuit Protection:

The display will show the below error code when there is a short circuit:

  • 1. F1: resistance for the heating coil of cartomizer is bigger than 0.5R, or smaller than 1.3R
  • 2. F2: resistance for the heating coil of cartomizer is smaller than 0.5R