Vamo

From Planet of the Vapes Wiki
Jump to: navigation, search
The Vamo in 18350 mode. ZT
The Vamo in 18650 mode, ZT

The Vamo is a dual action Variable Voltage and Variable Wattage device.

Specifications

  • Metal buttons
  • Variable Volt: 3~6.0V,
  • Variable Watt: 3~15W.
  • Thread: 510/eGo
  • PWM (Pulse Width Modulation) output, up to 5 amps
  • 5 click on/off
  • Multiple battery options (1 x 18650, 1 x 18350 or 2 x 18350)
  • Reverse and short protection
  • Low resistance and low battery warning

Operation

  • Turn On or Off:
    • Press the Power (large) button 5 times within 2 seconds.
  • Switch between VV and VW:
    • Press and hold + and - buttons for 3 seconds (v for volts, w for Watts).
  • Voltage adjust:
    • Tap the + or - buttons to raise or lower output voltage (in .1 volt increments).
  • Wattage adjust:
    • Tap the + or - buttons to raise or lower output wattage (in .5 watt increments).
  • Resistance check:
    • With an atomiser or cartomiser installed on unit, press and hold the + button for 2 seconds. Atomiser resistance is displayed in ohms.
  • Battery voltage check:
    • Press and hold the - button for 2 secs to check actual battery voltage

Vamo User Manual <pdf>http://www.meshweaver.com/temp/vaping/VAMO_VV_VW_MOD_V2_USER_GUIDE.pdf</pdf>


Back to Main Page

Back to Variable Wattage

Back to Variable Voltage

Back to Device List